Installing the Printer Driver
About KONICA MINOLTA Corporate Information At a Glance Message from the President Company Overview Business Units Sustainability Investor Relations Research and Development KONICA MINOLTA Group U.S.A. Konica Minolta Business Solutions U.S.A. Konica Minolta Healthcare Americas Konica Minolta Sensing Americas KONICA MINOLTA Group Worldwide Global. Have a look at the manual Konica Minolta bizhub 20p User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61. ITraining - get to know and use your bizhub device quickly and efficiently. No matter what the changes or additions to your office routine – to ensure ongoing productivity and efficiency, you need to incorporate any alterations and master new technology as fast as possible. Konica Minolta understands.
2
IC-202
2-27
5
Select [Uninstall Printer Driver] and
click [Next].
6
Driver name to be deleted (KONICA
MINOLTA 750/600 PCL) is dis-
played. Turn the check box on the
left of the driver name to ON and
click [Uninstall].
7
Printer driver name is displayed
again for confirmation. click [Unin-
stall].
8
Upon completion of deletion of the
printer driver, you are prompted to
restart the computer. Click [OK] to
start again.
Deletion of the printer driver with the installer is now completed.
Nokia manuals download. The Konica Minolta Guide to LDAP
This guide details how to set up the:
Bizhub 250/350, 420/500, 361/421/501, 600/750 Bizhub C250, C252, C300, C351, C352, C450 Bizhub C203, 253, 451, ,550, 650
Created by Hotline Support
Konica Minolta Hotline Support (UK)
V1.2
LDAP, Lightweight Directory Access Protocol, is an Internet protocol that Konica Minolta machines can use to look up E-Mail
Addresses from a server running Active Directory with LDAP Service* *Server 2008, LDAP is installed separately to Active Directory*
To set up LDAP on the Konica Minolta Bizhub machines, please follow the instructions below: NB: this is a guide only and is not indicative of actual settings for your network or machine as the LDAP structure varies from Network to Network and machine.
It is advisable for the Network Administrator to configure settings as a knowledge of the Network is required.
C250, 252, C300, C351, C352, C450, BH420/BH500, BH600/BH750
Setting up via the Control Panel –
1)Press on Utility/Counter
2)Press on Administrator Setting and enter the Admin code of 12345678
3)Press on Network Setting
4)Press on LDAP Setting
5)Press on ‘Enabling LDAP Function’ and select ‘ON’. Press ‘OK’
6)The machine will then take you out of Network Settings and you will have to follow steps 3 & 4 again
7)Press on ‘Setting Up LDAP’ and the following screen will appear
8)Enter the IP address of the server where LDAP is configured
9)Enter in the ‘Search Base’ of the domain.
As a rough guide you can find the domain by right clicking ‘My Computer’ and going in to the Properties. Under the ‘Computer Name’ tab it will say ‘Domain’ as below. The basic rule for the Search Base is if the customer has a separate container of employee e-mail addresses that are outside of the root of the domain this must also be specified. If they do not, you only need to input the root.
For example, the customer has a container called Sales, and his domain is mydomain.co.uk. The search base would be: ou=Sales,dc=mydomain,dc=co,dc=uk
Without the Sales container, it would be dc=mydomain,dc=co,dc=uk(Searches entire domain)
My Computer Properties
10)Press the ‘FWD’ button to progress to the next screen
11)These next settings are very much dependent on the customer’s server and how it has been set up. For example, the Hotline in Basildon runs on a different network to the LDAP server. On our machines, we have to set the ‘General Settings’ to ‘Simple’ but on the next screen we have to force the domain within the User Name. On other machines in the building that are on the same network as the server, ‘General Settings’ are set to GSS-SPNEG0 and the domain does not need to forced.
12)Press the ‘FWD’ button to progress to the next screen
13)Enter the ‘Login Name’ and ‘Password’ of an account that is set up on the server.
This is us forcing the domain
14)Enter in the ‘Domain Name’ as discovered in Step 9.
15)Press the ‘FWD’ button to progress to the next screen
16)Set as required
On the machine, a ‘Check Connection’ button will appear here. Once you have entered the settings, press on this button to ensure the machine can see the LDAP server
Set up of LDAP is now complete.
You can also set this up via a web browser.
To do this, follow the instructions below:
1)Enter the IP address of the Konica Minolta machine into Internet Explorer and press Go
2)Log into the web page using the Admin code for the machine. Depending on which machine you have, this will either be 8 x 0’s (00000000) or 12345678.
3)Click on the Network tab at the top of the screen
4)Then click on LDAP
5)Once you have input the settings, be sure to click on ‘Check LDAP Setting’
Bizhub 250/350
Setting up via the Web Browser-
It is easier to configure the Bizhub 250/350 via the web interface.
1)Log into Admin Mode using the code of 8 x 0’s (00000000) and click on the Network tab. Make sure you enable LDAP under the ‘LDAP’ heading before you go into ‘LDAP Server Setting’
2)Select any available set of 3 dashes(allowed up to 5 servers) we will assume Hot2003 does not exist
3)The LDAP Server screen opens as below, you may need to force the domain as shown. Search base will be your FQDN in dc=, format. Domain Name would be your normal domain logon name.
Forcing the
Domain
Bizhub C203 – 650 (Bizhub 361-501 is similar)
Setting up via the Control Panel –
At Machine:
1.Press Utility/Counter
2.Press “Administrator Settings”
3. Enter the Administrator Password, default = 12345678 and press “OK”
4. Press “Fax Settings”
5. Press “Function Settings”
6. Press “Forward TX Setting”
7. Press all as arrowed then “Select from Address Book”
8. Here you have a couple of options, you can select “Index” and search for a recipient or select “Destination Type” and “E-Mail” then select the recipient. The latter is shown below
8.Press “OK” you will then be returned to the screen as in 7 only this time you will see your selected recipient in the Forward Dest. Dialogue box.
9. Press “OK” then “Close” until back to main screen
Konica Minolta Ms6000 Mkii Drivers
Setting up via the Web Interface-
1.Enter the IP address of the Konica Minolta machine into Internet Explorer and press Go
2.Log into the web page using the Admin code for the machine.
Konica Minolta Bizhub 600 Price
Default = 12345678.
3.Click on the Network tab at the top of the screen
4.Then click on LDAP Setting and set to Enable
4)Select “Setting Up LDAP” and select any available radio button. we will assume Hot2003 does not exist.
5. Select “Edit”
6. Enter you network settings in the dialogue box’s including password. The copier will use the Admin credentials to interrogate LDAP (none of this is seen by end user)
6.Select “OK” you will then be returned to the screen as in 5-6 above, where you can ‘Test’ the connection. If all OK you can Logout.
To use the LDAP search function the procedure will vary slightly depending on the machine model. For this example we will use the Bizhub C550.
For File Type selection please refer to the relevant User Manual
User Mode:
1.Place Document(s) in document feeder
2.Select “FAX/SCAN”
3.Select Address Search Tab
4.Select “Search”
5.Enter firstname or lastname or part thereof
6.Select “Start Search”
A manual for creating atheist download. 7.Machine will retrieve names from the LDAP server matching search criteria
8.Select Recipient(s) - *Select “Name-Dest” then name*Only if Fax Unit Fitted
9.Select “OK”
10.Press “Start”
Setting up and Printing using User Authentication on Bizhub’s C203-C650
Machine used for Example Bizhub C550
Login to the machine’s web browser as Administrator
Set up machine to “look” at LDAP Server before enabling Authentication , if machine can already search LDAP for basic email search then any errors with this set up will most likely be due to configuration and not machine.
Click on “Security” then “External Server Registration” then “Edit”
Click on “Edit” and enter details as per your network
Click “OK” then “OK” to confirmation message, you will then be returned to the screen shown previously only now you will see the server listed. You can add multiple servers if required
Click on “User Auth/Account Track” enable function as “General Settings” highlighted below
Showing Enabling User Authentication - option can be set for Public User Access for BW access if required. Default Function permissions can also be set if required, eg: Total copy/print restriction (ALL users).
Click “OK” to all Messages then Logout.
User Mode
User is shown Logon Screen on Copier consisting of:
•Username (1)
•Password (2)
•Domainname (3)
(1)Users Domain Login Name
(2)Users Domain Password
Konica Minolta Bizhub Manual
(3)No need to touch (fixed - unless multiple servers/domains are used)
Konica Minolta User Manuals
Press “Login”
The Machine will now Authenticate against the Domain Controller all machine functions should now be available.
NB:Once a user has successfully logged into the machine an account will be created on the machine consisting of “username” for usage accounting tracking purposes
